Quantification of virus by TCID₅₀ assay
Procedure
- Seed an appropriate number of cells in the 96-well round-bottom plate.
- After 12 hours, prepare 10-fold serial dilutions of the virus (e.g., 10−1 to 10−8).
- Add 900 µL of serum-free medium to each tube.
- Add 100 µL of virus stock to the first tube to make a 10−1 dilution.
- Mix well, then transfer 100 µL from this tube to the next to prepare further serial dilutions.
- Remove growth medium from the wells and add a fixed volume (e.g., 100 µL) of each virus dilution to multiple replicate wells, usually 3-4.
- Incubate the plate for 72 hours at 37 °C with 5% CO₂.
- Observe the cells for cytopathic effects (CPE) and record the number of CPE-positive and CPE-negative wells for each dilution [2].
Calculation of TCID₅₀ by Reed–Muench Method
Example Data
| Virus Dilution |
No. of wells infected (CPE +) / Total wells |
| 10−3 |
4/4 (100%) |
| 10−4 |
3/4 (75%) |
| 10−5 |
2/4 (50%) |
| 10−6 |
1/4 (25%) |
| 10−7 |
0/4 (0%) |
Steps for Reed–Muench Calculation
Identify the dilution where percentage positive is just above 50%
- 10−4 (75%)
Identify the dilution where percentage positive is just below 50%
- 10−6 (25%)
Calculate the Proportionate Distance (PD)
PD=% positive above 50−% positive below 50% positive above 50−50
PD=75−2575−50=5025=0.5
Calculate TCID₅₀ dilution
log10(TCID50 endpoint)=log10(dilution above 50%)+(PD×log10(dilution factor))
log10(TCID50 endpoint)=log10(10−4)+(0.5×1)
log10(TCID50 endpoint)=−4+0.5=−3.5
Final Result
- TCID₅₀ endpoint = 10−3.5 per inoculation volume
If 0.1 mL of virus was inoculated per well:
TCID50/mL=10−3.5+1=10−2.5
Alternatively expressed as:
TCID50/mL=102.5≈316 TCID50/mL